barrier gate

Controller:                                                                                                        

• Wireless or wiring multiple push button for Open, Close and Open/Stop/Close function
• Accepting additional input signals : proximity card , loop detector, manual switch etc
• Operating speeds are 1 - 6 seconds from horizontal to verticle position, depending on boom length
• Obstacle detection system reverses the direction of travel if the arm encounters an obstruction
• Autoclosing function is selectable with instant or delay closing
• High performance with the exclusive imbedded controller

Mechanism

• Reliable direct drive system reduce wear and stress, and modularized mechanism provides maximum user convenience; Direct connection of the motor and driving shaft eliminates operation errors, caused by sliding or extending that might happen by using belt or chain
• Heavy-duty design for 24 hours continuous application
• High durability with industrial parts
• Internally counterbalanced gate arm tension springs
• All the running is quiet without any noise and shaking
• Galvanized sheet steel of 1.6 mm thickness.
• Barrier arm can be manually lifted via a clutch-release key

Motor

• Three million times or above operation test for motor
• Overheat and overload dual protection for motor

Housing

• Cabinets are powder coated in lemon yellow and black intervals, but any other coulours are available on request
• Weather-resistant coating against hostile environments Strong, rigid aluminum gate arm
• Zinc plate powder-coated finish of the lever and body

Bar

• The boom opens to 85º on power failure
• Two rubber buffers are used for boom dampening on the down position to eliminate bouncing.